Table of Contents
Advertisement
Defining the
Measurement
NOTE
Testing the Agilent/HP 8663A Internal/External 10 MHz
1. From the File menu, choose Open.
2. If necessary, choose the drive or directory where the file you want is
stored.
3. In the File Name box, choose "Conf_8663A_10MHz.pnm".
4. Click the Open button.
The appropriate measurement definition parameters for this example
have been pre-stored in this file.
Agilent/HP 8663A 10 MHz Measurement," on page 5-31
parameter data that has been entered for this measurement example.)
Note that the source parameters entered for step 2 in
appropriate for the reference source you are using. To change these values,
refer to
Table 5-2 on page
to
"Beginning the Measurement" on page
Agilent Technologies E5500 Phase Noise Measurement System 5-11
Expanding Your Measurement Experience
Table 5-4, "Parameter Data for the
5-12, then continue with step "a". Otherwise, go
5-16:
lists the
Table 5-4
may not be
Advertisement
Table of Contents
