7
CAUTION
Absolute Measurement Examples
What You'll Find in This Chapter
•
Measurement Examples
Stable RF Oscillator, page 7-2 (StableRF.pnm)
Free-Running RF Oscillator, page 7-24 (FreeRF.pnm)
RF Synthesizer using DCFM, page 7-48 (RFSynth_DCFM.pnm)
RF Synthesizer using EFC, page 7-72 (RFSynth_EFC.pnm)
Microwave Source, page 7-97 (MicroSRC.pnm)
To prevent damage to the Agilent/HP 70420A test set's hardware
components, the input signal must not be applied to the signal input
connector until the input attenuator has been correctly set for the desired
configuration, as show in
when the Connection Diagram appears.
Agilent Technologies E5500 Phase Noise Measurement System 7-1
Table 7-3 on page
7-9. Apply the input signal