Using The Server Hardware Connections To Specify The Source - Agilent Technologies E5500A User Manual

Expanding Your Measurement Experience

Using the Server Hardware Connections to Specify the Source

Using the Server Hardware Connections to
Specify the Source
1. From the System menu, choose Server Hardware Connections.
2. From the Test Set pull-down list, select Agilent/HP 8663.
3. A green check-mark will appear after the I/O check has been performed
by the software. If a green check-mark does not appear, click the Check
I/O button.
5-8 Agilent Technologies E5500 Phase Noise Measurement System