Your First Measurement
Making a Measurement
4. Click the Open button.
The appropriate measurement definition parameters for this example
have been pre-stored in this file.
parameter data that has been entered for the Agilent/HP 70420A
confidence test example.
5. To view the parameter data in the software,
a. From the Define menu, choose Measurement; then choose the
Sources tab from the Define Measurement window. The parameter
data is entered using the tabbed windows. Select various tabs to see
the type of information entered behind each tab.
6. Click the Close button.
3-6 Agilent Technologies E5500 Phase Noise Measurement System
Table 3-1 on page 3-10
lists the