Starting And Stopping Recording - EDAN iM50 User Manual

Patient Monitor User Manual

24.2 Starting and Stopping Recording

The monitor provides several types of stripe recording. You can start recording following the
procedure below:
Recording Type
Continual real-time recording
8-second
recording/20-second real-time
recording
Trend graph recording
Trend table recording
NIBP review recording
Arrhythmia review recording
Alarm review recording
Drug calculation
recording
Hemodynamic
result recording
Oxygenation Calculation result
recording
Description/ Procedure
Select at least one Rec waveform in Recorder Setup (A
maximum of three waveforms can be selected), select
Continual in R-T Rec Time . Press the Record button on
the front panel or select shortcut key
recording. Press the button again to stop recording.
real-time Select at least one Rec waveform in Recorder Setup (A
maximum of three waveforms can be selected), select 8 s or
20 s in R-T Rec Time , set Record Interval as needed,
press the Record button on the front panel or select shortcut
key
stop recording or when R-T Rec time ends, the monitor
stops recording automatically. The runtime for each wave is
8 seconds or 20 seconds. The record Interval can be set as:
Off , 10 min , 20 min , 30 min , 40 min , 50 min , 1 h , 2 h , 3
h , 4 h . The default recording time is 8 s .
Select Menu > Review > Trend Graph , click Record to
start recording.
Select Menu > Review > Trend Table , click Record to
start recording.
Select Menu > Review > NIBP Review , click Record to
start recording.
Select Menu > Review > ARR Review , select one
arrhythmia alarm and click Record to start recording.
Select Menu > Review > Alarm Review , select one alarm
and click Record to start recording.
titration Select Menu > Common Function > Calculation > Drug
Dose > Titration , click Record to start recording.
Calculation Select Menu > Common Function > Calculation >
Hemodynamics , click Record to start recording.
Select Menu > Common Function > Calculation >
Oxygenation , click Record to start recording.
to start the recording. Press the button again to
- 202 -
Recording
to start the