Patient Monitor User Manual
18
When multiple parameters are simultaneously displayed and one of the parameter
values is close to the limit value, the waveform might get non-smooth, please take the
parameter value as the reference.
19
If the touch screen fails, use the rotary knob and keys and contact the service
personnel.
NOTE:
1
Position the device in a location where the operator can easily see the screen and
access the operating controls.
2
The monitor can only be used on one patient at a time.
3
If the monitor gets damp or liquid pours on the monitor, please contact the service
personnel of EDAN.
4
This monitor is not a device for treatment purposes.
5
The pictures and interfaces in this manual are for reference only.
6
Regular preventive maintenance should be carried out every two years. You are
responsible for any requirements specific to your country.
7
When there's measurement beyond range, invalid measurement or no measurement
value, it will display -?-.
8
In normal use, the operator shall stand in front of the monitor.
1.3 Explanation of Symbols on the Monitor
1
2
3
4
5
6
CAUTION
DEFIBRILLATION-PROOF TYPE CF APPLIED PART
DEFIBRILLATION-PROOF TYPE BF APPLIED PART
Caution
MR Unsafe - Keep away from magnetic resonance
imaging (MRI) equipment
Equipotentiality
Alternating Current
- 7 -
Intended Use and Safety Guidance