EDAN iM50 User Manual page 83

Patient Monitor User Manual
Message
ExtremeBrady Off
V-Tach Off
Vent Brady Off
Key ARR Alarm Off
Electrode Contact Poor
SpO Search Pulse
2
Manual Measuring
Continual Measuring
Auto Measuring
Sequence Measuring
Measurem. Canceled
Calibrating
Calibrat. Canceled
Leak. Test Running
Leak.Test Canceled
Module Self Test
Manometer Mode
Please Switch To Maintain
Mode
(Omron NIBP module)
Please Switch
Mode
(Omron NIBP module)
Leakage Test Ok
Resetting
Please Start
Done
Venipuncture Starting
Cause
Extreme Bradycardia alarm is set to Off.
V-Tach alarm is set to Off.
Vent Brady alarm is set to Off.
One of Key ARR alarms is set to Off.
The electrode has bad contact with patient's body.
SpO
for the pulse to compute the saturation, when sensor is
connected with patient.
In manual measuring mode
In continuous measuring mode
In automatic measuring mode
In sequence measuring mode.
Press the "Start/stop NIBP measurement" button or
shortcut key
During calibrating
Calibration is over.
The leakage test is in process.
Pneumatic test over
The module is self-testing.
Calibrate in this mode.
Need to calibrate in this mode.
To Normal
Need to measure in normal mode.
There is no leak.
NIBP module in resetting
NIBP module is in idle status.
NIBP measurement is completed.
Start the assisting venipuncture and the cuff begins to
inflate.
module is analyzing the patient signal and searching
2
to stop the measurement.
- 71 -
Alarm Information