EDAN iM50 User Manual page 278

Patient Monitor User Manual
Gas
Metered dose inhaler propellants
C H OH (Ethanol)
2 5
C H OH (Isopropanol)
3 7
CH COCH (Acetone)
3 3
1)
CH (Methane)
4
CO (Carbon monoxide)
NO (Nitrogen monoxide)
5)
O
2
Note 1: According to the EN ISO 80601-2-55:2011 standard.
Note 2: Negligible interference with N
specification "Accuracy, all conditions" above.
Note 3: Negligible interference, effect included in the specification "Accuracy, all conditions"
above.
Note 4: Interference at indicated gas level. For example, 50 vol% Helium typically decreases the
CO readings by 6%. This means that if measuring on a mixture containing 5.0 vol% CO
2
vol% Helium, the actual measured CO
vol% CO .
2
Note 5: In addition to the EN ISO 80601-2-55:2011 standard.
Masimo Mainstream Module
Dimensions (W × D × H)
Weight
According to the degree of
protection against
ingress of water
Mechanical robustness
Recovery time after defibrillator
test
Drift of measurement accuracy
Surface temperature (at ambient
temp. 23 °C)
Airway adapters
Gas Level
1)
Not for use with metered dose inhaler propellants
1)
0.3 vol%
1)
0.5 vol%
1)
1 vol%
3 vol%
5)
1 vol%
5)
0.02 vol%
100 vol%
O / O
2
concentration will typically be (1-0.06) * 5.0 vol% = 4.7
2
38 mm × 37 mm × 34 mm (1.49" × 1.45" ×1.34")
≤ 25 g (cable excluded)
IP44
harmful
Withstand repeated 1.8 m drops on a hard surface.
Complies with requirements for shock and vibration for
professional
80601-2-55:2011 and requirements for road ambulances
according to EN1789:2007 (clause 6.4).
Unaffected
No drift
Max 39
Disposable adult/pediatric:
Effect on CO
3)
–
3)
–
3)
–
3)
–
3)
–
3)
–
2)
–
concentrations correctly set, effect included in the
2
transportation
°C / 102 ℉
- 266 -
Product Specification
2
according to EN
and 50
2
ISO