Table of Contents
Advertisement
Patient Monitor User Manual
4.
Choose a network from the window, in which the user can check the network's encryption
information (Security). The user will be prompted to enter the password of that network if a
password is required. After entering the password and setting the IPv4 address, the user can
click
to connect the network.
5.
Or select
to connect the hidden networks. After entering Network Name, Security,
password and setting the IPv4 address, the user can click
If the monitor is successfully connected to the selected network, it will be indicated by the
message Connected, and the local IP address of the monitor will be displayed in the Wi-Fi Setup
window. Also, a symbol indicating the networking state will be displayed on the lower portion of
the main screen. The meanings of the networking state symbols are explained below:
Click
to review the historically connected networks. After choosing certain network, the user
can select Forget This Network or Join This Network.
If the encryption information of the currently connected network is modified, the network will
automatically disconnect and attempt to reconnect. At this time, click
network and then connect manually. For an unconnected network, if the encryption information
or SSID is modified and the user attempts to connect it, the user needs to disconnect the currently
connected network and click
The following symbols may appear when configuring Wi-Fi:
Symbol
Description
Connect to hidden networks
View
networks
Refresh network list
Turn the page left and right. to
view more networks
Secure network
NOTE:
1
Be aware that some network-based functions may be limited for monitors on wireless
networks in comparison with those on wired networks.
2
The obstacle may interfere with data transmission and even cause data loss.
3
If the monitor fails to connect to any wireless network or no available wireless network
Wi-Fi signal intensity: Level 4
Wi-Fi signal intensity: Level 3
Wi-Fi signal intensity: Level 2
Wi-Fi signal intensity: Level 1
to select the updated network.
historically
connected
to connect the hidden network.
Symbol
Description
Insecure
recommended). Icon color is red.
Hide password
Show password
Connect the network
Disconnect the network
- 37 -
Networked Monitoring
first to ignore this
network
(not
Advertisement
Table of Contents
