Mixer/Tuning: Eq Gain; Mixer/Tuning: Eq Control - Korg pa2X pro User Manual

98 Style Play operating mode

Mixer/Tuning: EQ Gain

Mixer/Tuning: EQ Gain
In this page you can set the three-band equalization (EQ) for
each individual track.
Use the TRACK SELECT button to switch from the Keyboard to
the Style tracks, and vice-versa.
Hi (High) Gain
This parameter lets you adjust the high frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
-18...+18dB High gain value in decibels.
Mid (Middle) Gain
This parameter lets you adjust the middle frequencies equaliza-
tion on each individual track. This is a bell curve filter. Values are
shown in decibels (dB).
-18...+18dB Middle gain value in decibels.
Low Gain
This parameter lets you adjust the low frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
-18...+18dB Low gain value in decibels.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.

Mixer/Tuning: EQ Control

This page lets you reset or bypass track equalization, pro-
grammed in the previous page.
Use the TRACK SELECT button to switch from the Keyboard to
the Style tracks, and vice-versa.
Track Reset buttons
Sty
Use these buttons to reset (i.e., "flatten") equalization for the
corresponding track.
Reset All Tracks button
Touch this button to reset (i.e., "flatten") equalization for all
tracks (both Realtime and Style tracks).
Sty
Bypass
Check any of these checkboxes to bypass equalization for the corre-
sponding track. When bypassed, equalization has no effect on the
track, but all parameters are preserved. When the box is unchecked,
equalization is activated again with the original settings.
On The bypass function is engaged, so no equaliza-
tion is active on the corresponding track.
Sty
Off The bypass function is not engaged, so the equal-
ization is active on the corresponding track.
Input Trim
This knob allows you to limit the level of the signal passing
through the equalizer. Extreme equalization values can overload
Sty
the audio circuits and lead to distortion. This control lets you set
equalization as desired, and at the same time avoid overloading.
0...99 Limiting value. The higher, the most effective it is.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Sty
Sty
Sty