Transmit Emi/Oe Setting Register - Fujitsu MB86617A Specification Sheet

LSI S pecification

7.39. Transmit EMI/OE Setting Register

Transmit EMI/OE setting register sets EMI information and Odd/Even value added to empty packet until valid data is transmitted.
Bit Bit
AD R/W
15 14
IPH
86h R/W IPH EMI-B
select
-B
Initial Value '0' "00 b"
BIT Bit Name
15 IPH select -B
14 - 13 IPH EMI-B
12 IPH OE-B
11 - 8 reserved
7 IPH select -A
Rev.1.0
Bit Bit Bit Bit
13 12 11 10
IPH
- -
OE-
B
'0' '0' '0'
Action Value
Sets the default value (EMI='00', OE = '0') as EMI information and Odd/Even
0
value added to IPH of empty packet until valid data is transmitted after starting
transmission.
Read/
Write
Selects the setting value of IPH EMI-B (bit14 to 13) and IPH OE- B (bit 12) as EMI
1 information and Odd/Even value added to IPH of empty packet until valid data is
transmitted after starting transmission.
Set EMI information which are set in IPH of empty packet transmitted from
bridge-Bch.
Read/ Valid only when IPH select-B (bit15) is set to '1'.
-
Write (MSB: bit14, LSB: bit13)
EMI information after transmitting valid data depends on the setting of EMI
select-B (12h-bit4).
Set Odd/Even value which is set in IPH of empty packet transmitted from
bridge-Bch.
Read/
-
Valid only when IPH select-B (bit15) is set to '1'.
Write
EMI information after transmitting valid data depends on the setting of o/e select-B
(3Eh-bit15).
Read - Always indicate '0'.
Write - Always write in '0'.
Sets the default value (EMI='00', OE = '0') as EMI information and Odd/Even
0
value added to IPH of empty packet until valid data is transmitted after starting
transmission.
Read/
Write
Selects the setting value of IPH EMI-A (bit6 to 5) and IPH OE-A (bit 4) as EMI
1
information and Odd/Even value added to IPH of empty packet until valid data is
transmitted after starting transmission.
Bit Bit Bit Bit
9 8 7 6
IPH
IPH EMI-A
- -
select
-A
'0' '0' '0' "00 b"
Function
78
MB86617A
Bit Bit Bit Bit
5 4 3 2
IPH
- -
OE-
A
'0' '0' '0'
Fujitsu VLSI
Bit Bit
1 0
- -
'0' '0'