Parametering The Setting; General; Setting Parameters - Fujitsu WATERSTAGE UTW-SCB A Series Operation Manual

Control Box
1 8

Parametering the setting

1 8 1 General

• Only the parameters accessible to level :
End user.
Are described in this section.
• The parameters accessible at levels :
Commissioning level.
Engineer level.
... are described in this section reserved for
these professional specialists. Do not make any
modifications to these parameters without advice
from these professional specialists
Basic Brief
OK
display press
Line Function
Date and time
1 Hours / Minutes
2 Day / Month
3 Year
Operator section
20 Language
Heating time programme, circuit 1
500 Pre-selection (Day / Week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday...
501 1 phase On (start)
st
502 1 phase Off (end)
st
503 2 phase On (start)
nd
504 2 phase Off (end)
nd
505 3 phase On (start)
rd
506 3 phase Off (end)
rd
516 Default values, Circuit 1
Yes + OK : The default values memorised in the regulator replace and cancel the customised heating programmes.
Your customised settings are therefore lost.
Operation manual "1408 - EN"
End user
OK
Time of day and date
Operator section
Time prog heating circuit 1
...
Setting range or display
00:00... 23:59
01.01... 31.12
1900... 2099
English, Français, Italiano,
Nederlands
00:00... --:--
00:00... --:--
00:00... --:--
00:00... --:--
00:00... --:--
00:00... --:--
No, Yes

1 8 2 Setting parameters

With the screen on basic display.
- Press OK.
Once in "End user" level
- Scroll the menu list.
- Choose the desired menu.
- Scroll the function lines.
- Choose the desired line.
- Adjust the parameter.
- Check the setting by pressing OK
- To return the menu, press ESC
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
Hours / minutes 1
Day / Month 2
Year 3
OK
Hour 1...24 h
Minutes 0...60 min
Setting Basic setting
increment
1
1
1
English
Mon-Sun
10 min 6:00
10 min 22:00
10 min --:--
--:--
10 min
10 min --:--
10 min --:--
No
- 9 -
OK