Fujitsu MB86617A Specification Sheet page 52

LSI S pecification
BIT Bit Name
9~8 reserved
7 CG chg-A
6 TS chg-A
5 no 47h-A
TSP FIFO
4
full-A
TSP FIFO
3
emp-A
T x-length-err -
2
A
1 - 0 reserved
Rev.1.0
Active Value
Read - Always indicate '0'.
0 Indicates that CGMS information input from port A of TSP IC I/F is not changed.
Read
Indicates that CGMS information input from port A of TSP IC I/F is changed.
1
Clears to '0' by lead of this register.
0 Indicates that TS classification ID input from port A of TSP IC I/F is not changed.
Read
Indicates that TSCH classification ID input from port B of TSP IC I/F is not
consistent with TSCH classification ID (10h- bit12 to 7 set TS-ID- A or 12h- bit12 to
1
7 set TS -ID-B) to be stored to FIFO.
Clears to '0' by lead of this register.
Indicates that synchronization byte of received MPEG2-TS input from CP-IC by
0
bridge-Bch is 47h
Read
Indicates that synchronization byte of received MPEG2-TS input from CP-IC by
1 bridge-Bch is not 47h
Clears to '0' by lead of this register.
0 Indicates that FIFO on TSP IC I/F side of bridge-Ach is not full.
Read
1 Indicates that FIFO on TSP IC I/F side of bridge-Ach is full.
0 Indicates that FIFO on TSP IC I/F side of bridge-Ach is not empty.
Read
1 Indicates that FIFO on TSP IC I/F side of bridge-Ach is empty.
0 Indicates transmit data length input from TSP IC I/F is normal.
Indicates transmit data length input from TSP IC I/F is not consistent with
Read
specified format data length.
1
Deletes transmit data without writing into FIFO.
Clears to '0' by lead of this register.
Read - Always indicate '0'.
Function
47
MB86617A
Fujitsu VLSI