Table of Contents
Advertisement
6-1
Network setting (server PC side setting)
To exchange data between server and client, perform the following settings (necessary with all connection
methods).
Security software setting
When introducing security software, register "VrfController.exe" and "VrfExplorer.exe" at the security
software. The setting method differs with the security software.
Regarding the following setting, the necessary settings differ with the server and client connection method.
Perform setting after confirming the connection method
1.
Internet connection
The permission of the network administrator may be necessary to communicate outside the intranet.
Please contact both the server side and client side network administrator.
When connecting through a provider, establishment of a line with the provider is necessary. For de-
tails, please contact the provider used. In any case, a fixed IP address is necessary at the server side
PC.
2.
Dial-up connection
Incoming setting is necessary. → 6-1-1 Incoming setting.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
53
Advertisement
Table of Contents
