VKS
Vertical keystone setting
Format
VKS=<Vertical keystone distortion value:Number>
GET□VKS
Environment
Power
OFF
ON
X
O
Response
"i:OK" is returned if the parameter was set properly.
For '
GET VKS
'
g:VKS=<Vertical keystone distortion value:Number>
For details on other responses, refer to the "Error List".
Description
(1)
This sets the vertical keystones.
(2)
This command is identical to pressing the "KEYSTONE" button on the remote control.
(3)
The settable keystone range varies depending on the input signal, screen size, number of
horizontal and vertical dots, and other factors.
If keystone values are outside the range, "e:0801 INVALID_VALUE" is returned.
(4)
The GET command can be used to obtain the current vertical/horizontal keystone value. ("
")
VKS
Example
Setting
> VKS=-23
< i:OK
Reference
> GET VKS or ?VKS
< g:VKS=-23
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/
?△VKS
PM
D-RGB A-RGB1 A-RGB2 COMP
X
' or '
', current vertical keystone setting value is returned as
?VKS
This sets the vertical keystone to –23.
This retrieves the vertical keystone.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO
HDMI
-
'
- 76 -
None
Revised by
Approved by
GET