Key Switch / Indicator Light Replacement - Polaris RZR 170 2009 Service Manual

6. Remove the (2) nuts retaining the front portion of the
drivers seat adjustment rail.
Remove
7. Remove the shift knob cap. Remove the fastener and shift
knob from the shift lever.
Shift Knob
8. Lift the console cover out from the vehicle as an assembly
IMPORTANT: Be sure to route the battery cables
through the console cover prior to removal to prevent
from damaging the cables or fuse holder.
BODY / SUSPENSION / STEERING

Key Switch / Indicator Light Replacement

1. Disconnect the key switch harness or indicator light
connectors located under the dash as shown.
Disconnect
2. If removing the key switch, loosen and remove the retaining
nut. Remove the key switch from underneath the dash.
Loosen
Nut
3. If removing an indicator light, loosen and remove the
retaining nut(s) located under the dash. Remove the
indicator light(s) from the dash.
Indicator Lights
NOTE: The indicator
assembly. Bulb replacement is not possible.
Key Switch
Indicator
Lights
lights are a complete
5.7
5