Loop Detection Configuration - Tripp Lite NGI-S04C2 Owner's Manual

5.3.2.2. Loop Detection Configuration

Parameter Description
Loop Detection Settings
Select this option to enable / disable loop detection on the
State
Switch.
Select a port or a range of ports which to configure loop
Port
detection.
Select option to enable/disable the loop detection feature on
State
port(s).
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Loop Detection Status
Port This field displays a port number.
State This field displays if the loop detection feature is enabled.
Status This field displays if the port is blocked by loop detection.
74