Web Configuration; Sntp - Tripp Lite NGI-S04C2 Owner's Manual

8.2.3.2. Web Configuration

Parameter
View Settings
View Name
View Subtree
View Type
Apply
Refresh
View Status
View Name
View Subtree
View Type
Action

8.3. SNTP

The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer
systems over packet-switched, variable-latency data networks. A less complex
implementation of NTP, using the same protocol but without requiring the storage of state
over extended periods of time is known as the Simple Network Time Protocol (SNTP).
Description
Enter the v3 view name for creating an entry in the SNMPv3
MIB view table.
The OID defining the root of the subtree to add to (or exclude
from) the named view.
Select included or excluded to define subtree adding to the
view or not.
Click Apply to configure the settings.
Click Refresh to begin configuring this screen afresh.
This field displays the v3 view name.
This field displays the subtree.
This field displays the subtree adding to the view or not.
Click Delete to remove a v3 view.
126