Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Quiet Period:

Specify a period of the time the client has to wait before the next re-authentication
attempt. This will prevent the Switch from becoming overloaded with continuous
re-authentication attempts from the client. The acceptable range for this field is 0 to
65535 seconds.
Server Timeout:

The server-timeout value is used for timing out the Authentication Server.
Supp-Timeout:

The supp-timeout value is the initialization value used for timing out a Supplicant.
Max-req Time:

Specify the amount of times the Switch will try to connect to the authentication
server before determining the server is down. The acceptable range for this field is 1
to 10 times.
6.1.1.

CLI Configuration

Node Command
enable show dot1x
enable show dot1x username
enable show dot1x
accounting-record
configure dot1x authentication
(disable|enable)
configure dot1x authentic-method
(local|radius)
configure no dot1x
authentic-method
configure dot1x radius
primary-server-ip <IP>
port PORTID
configure dot1x radius
primary-server-ip <IP>
port PORTID key KEY
configure dot1x radius
secondary-server-ip
<IP> port PORTID
configure dot1x radius
secondary-server-ip
<IP> port PORTID key
KEY
configure no dot1x radius
secondary-server-ip
Description
This command displays the current 802.1x
configurations.
This command displays the current user
accounts for the local authentication.
This command displays the local accounting
records.
This command enables/disables the 802.1x
authentication on the switch.
This command configures the authentic method
of 802.1x.
This command configures the authentic method
of 802.1x to default.
This command configures the primary radius
server.
This command configures the primary radius
server.
This command configures the secondary radius
server.
This command configures the secondary radius
server.
This command removes the secondary radius
server.
81