Table of Contents
Advertisement
(disable|enable)
interface
spanning-tree cost
VALUE
interface
no spanning-tree cost
interface
spanning-tree
port-priority <0-240>
interface
no spanning-tree
port-priority
configure interface range
gigabitethernet1/0/
PORTLISTS
if-range
spanning-tree
(disable|enable)
if-range
spanning-tree
bpdufilter
(disable|enable)
if-range
spanning-tree
bpduguard
(disable|enable)
if-range
spanning-tree
rootguard
(disable|enable)
if-range
spanning-tree
edge-port
(disable|enable)
if-range
spanning-tree cost
VALUE
if-range
no spanning-tree cost
if-range
spanning-tree
port-priority <0-240>
if-range
no spanning-tree
port-priority
This command configures the cost for the specific
port.
Cost range:
16-bit based value range 1-65535,
32-bit based value range 1-200000000.
This command configures the path cost to default
for the specific port.
This command configures the port priority for the
specific port.
Default: 128.
This command configures the port priority to
default for the specific port.
This command enters the interface configure node.
This command configures enables/disables the
STP function for the specific port.
This command configures enables/disables the
bpdufilter function for the specific port.
This command configures enables/disables the
bpduguard function for the specific port.
This command enables/disables the BPDU Root
guard port setting for the specific port.
This command enables/disables the edge port
setting for the specific port.
This command configures the cost for the specific
port.
Cost range:
16-bit based value range 1-65535,
32-bit based value range 1-200000000.
This command configures the path cost to default
for the specific port.
This command configures the port priority for the
specific port.
Default: 128.
This command configures the port priority to
default for the specific port.
48
Advertisement
Table of Contents
