System Maintenance; Configuration; Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Host name
Boot Code Version
Firmware Version
Built Date
DHCP Client
IP Address
Subnet Mask
Default Gateway
MAC Address
Serial Number
Refresh

8.5. System Maintenance

8.5.1.

Configuration

Upload and Download Configuration
8.5.1.1.
Node Command
configure write memory
configure archive
download-config
<URL PATH>
configure archive upload-config
<URL PATH>
configure reload default-config
This field displays the host name of the Switch.
This field displays the boot code version.
This field displays the firmware version.
This field displays the built date of the firmware.
This field displays whether the DHCP client is enabled on the
Switch.
This field indicates the IP address of the Switch.
This field indicates the subnet mask of the Switch.
This field indicates the default gateway of the Switch.
This field displays the MAC (Media Access Control) address of
the Switch.
The serial number assigned by manufacture for identification of
the unit.
Click Refresh to begin configuring this screen afresh.

CLI Configuration

This command writes current operating
configurations to the configuration file.
This command downloads a new copy of
configuration file from TFTP server.
Where <URL PATH> can be:
ftp://user:pass@192.168.1.1/file
http://192.168.1.1/file
tftp://192.168.1.1/file
This command uploads the current
configurations file to a TFTP server.
Where <URL PATH> can be:
ftp://user:pass@192.168.1.1/file
http://192.168.1.1/file
tftp://192.168.1.1/file
This command copies a default-config file to
replace the current one.
Note: The system will reboot automatically to
take effect the configurations.
132
Description