Snmp Event Settings; Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Community Name List
No.
Community String
Rights
Network ID of
Trusted Host
Number of Mask
Bit
Action
8.1.3.

SNMP Event Settings

The features allow users to enable/disables individual trap notification.
8.1.3.1.
Node Command
enable show snmp trap-event
configure snmp trap-event
alarm-over-heat
(disable/enable)
configure snmp trap-event
alarm-over-load
(disable/enable)
configure snmp trap-event
alarm-power-fail
(enable/enable)
configure snmp trap-event bpdu
(disable/enable)
configure snmp trap-event
loop-detection
(disable/enable)
configure snmp trap-event
port-admin-state-change
(disable/enable)
configure snmp trap-event
port-link-change
(disable/enable)
configure snmp trap-event
power-source-change
This field displays the index number of an entry.
This field displays the community string of an entry.
This field displays the right of an entry.
This field displays the network ID of trusted host of an entry.
This field displays the length of the subnet mask bits of an
entry.
Click the Delete button to remove the entry.

CLI Configuration

This command displays the SNMP
configurations.
This command enables/disables the
alarm-over-heat trap.
This command enables/disables the
alarm-over-load trap.
This command enables/disables the
alarm-power-fail trap.
This command enables/disables the BPDU
port state change/BPDU Root Guard/BPDU
Guard trap.
This command enables/disables the
loop-detection trap.
This command enables/disables the
port-admin-state-change trap.
This command enables/disables the
port-link-change trap.
This command enables/disables the
power-source-change trap.
117
Description