Web Configuration; Ring Configuration; Erps - Tripp Lite NGI-S04C2 Owner's Manual

4.2.3.2.
Parameter
Port Priority Settings
Port
Priority
Apply
Refresh
Port Priority Status
Port
Priority

4.3. Ring Configuration

4.3.1.

ERPS

Introduction
The ITU-T G.8032 Ethernet Ring Protection Switching feature implements protection
switching mechanisms for Ethernet layer ring topologies. This feature uses the G.8032
Ethernet Ring Protection (ERP) protocol, defined in ITU-T G.8032, to provide
protection for Ethernet traffic in a ring topology, while ensuring that no loops are within
the ring at the Ethernet layer. The loops are prevented by blocking traffic on either a
predetermined link or a failed link.

Web Configuration

Description
Selects a port or a range of ports on which to configure the
priority.
Select a priority for packets received by the port. Only packets
without 802.1p priority tagged will be applied the priority you
set here.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
This field displays a port number.
This field displays the priority for a port.
35