Tripp Lite NGI-S04C2 Owner's Manual page 58

Unknown Multicast
Packets
IPv4 Settings
DHCP Client
IP Address
Subnet Mask
Default Gateway
Apply
Refresh
between 1 and 4094. Use a comma (,) or hyphen (-) to specify
more than one VLANs. Select Delete and enter VLANs on
which to have the Switch not perform IGMP snooping.
Specify the action to perform when the Switch receives an
unknown multicast frame. Select Drop to discard the
frame(s). Select Flooding to send the frame(s) to all ports.
Select Enable to allow the Switch to automatically get an IP
address from a DHCP server. Click Renew to have the Switch
re-get an IP address from the DHCP server.
Select Disable if you want to configure the Switch's IP
address manually.
Configures an IPv4 address for your Switch in dotted decimal
notation. For example, 192.168.0.254.
Enter the IP subnet mask of your Switch in dotted decimal
notation for example 255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted
decimal notation, for example 192.168.1.1.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
58