Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

7.6.2.

Web Configuration

Parameter Description
Alarm Threshold Settings
Select option to enable / disable the alarm threshold feature on
State
the Switch.
Selects a port or a range of ports on which to configure the
Port
alarm threshold.
State Selects Enable / Disable the alarm threshold for the port(s).
Configures the threshold rate. When the port packet rate over
Packet Rate
the threshold, the Switch will send trap and syslog.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Alarm Threshold Status
Port This field displays a port number.
State This field displays the current alarm threshold state for the port.
Status This field displays if alarm threshold has happened on the port.
113