8.1.1.2.
Parameter
SNMP Settings
SNMP State
System Name
System Location
System Contact
8.1.2.
SNMP community Name
SNMP community acts like a password and is used to define the security parameters of
SNMP clients in an SNMP v1 and SNMP v2c environments. The default SNMP
community is "public" for both SNMP v1 and SNMP v2c.
Network ID of Trusted Host:
The IP address is a combination of the Network ID and the Host ID.
Network ID = (Host IP & Mask).
User need only input the network ID and leave the host ID to 0. If user has
input the host ID, such as 192.168.1.102, the system will reset the host ID, such as
192.168.1.0
8.1.2.1.
Node
Command
configure
snmp community
STRING (ro|rw)
trusted-host
IPADDR/Subnet
Mask
Web Configuration
Description
Select option to enable / disable the SNMP on the Switch.
User can configure system name.
User can configure the switch deployed location for reference.
User can configure System Contact person information like
name or number.
CLI Configuration
This command configures the SNMP community
name, Permission(ro/rw), Trusted host IP/Subnet
mask.
115
Description