Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Trunk port:
Allows the user to configure up to 5 VLAN's maximum on the interface and always
tagged where its PVID is 1 (the system configures them automatically). The port should
be connected to another switch.
Default Settings
All ports join in the VLAN 1.
6.6.2.1.
Node Command
enable show vlan VLANID
configure vlan <1~4094>
configure no vlan <1~4094>
vlan show
vlan name STRING
vlan no name
vlan add PORTLISTS
vlan fixed PORTLISTS
vlan no fixed PORTLISTS
vlan tagged PORTLISTS
vlan no tagged PORTLISTS This command removes all tagged member
vlan untagged PORTLISTS
vlan no untagged
PORTLISTS

CLI Configuration

This command displays the VLAN
configurations.
This command enables a VLAN and enters the
VLAN node.
This command deletes a VLAN.
This command displays the current VLAN
configurations.
This command assigns a name for the specific
VLAN.
The VLAN name should be the combination of
the digit or the alphabet or hyphens (-) or
underscores (_).
The maximum length of the name is 16
characters.
This command configures the vlan name to
default.
Note: The default vlan name is
"VLAN"+vlan_ID, VLAN1, VLAN2,...
This command add a port or a range of ports to
the vlan.
This command assigns ports for permanent
member of the vlan.
This command removes all fixed member from
the vlan.
This command assigns ports for tagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlan.
from the vlan.
This command assigns ports for untagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlan.
This command removes all untagged member
from the vlan.
102
Description