Snmp Trap Receiver Settings; Cli Configuration; Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Port
State
Apply
Refresh
8.1.5.

SNMP Trap Receiver Settings

The features allow users to configure trap receiver configuration.
8.1.5.1.
Node Command
configure snmp trap-receiver
IPADDR VERSION
COMMUNITY String
8.1.5.2.
Parameter
IP Address
Version
Community String
Apply
Refresh
Trap Receiver List
Selects the range of ports.
User can enable /disable trap events when port link change.
Click Apply to configure the settings.
Click Refresh to begin configuring this screen afresh.

CLI Configuration

This command configures the trap receiver's
configurations, including the IP address, version
(v1 or v2c) and community String.

Web Configuration

Description
Enter the IP address of the remote trap station in dotted decimal
notation.
Select the version of the Simple Network Management Protocol
to use. v1or v2c.
Specify the community string used with this remote trap
station.
Click Apply to configure the settings.
Click Refresh to begin configuring this screen afresh.
120
Description