Management; Snmp; Snmp Configuration; Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Packet Rate

8. Management

8.1. SNMPv1/v2c
Simple Network Management Protocol
Simple Network Management Protocol (SNMP) is used in network management systems
to monitor network-attached devices for conditions that warrant administrative attention.
SNMP is a component of the Internet Protocol Suite as defined by the Internet
Engineering Task Force (IETF). It consists of a set of standards for network management,
including an application layer protocol, a database schema, and a set of data objects.
SNMP exposes management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried (and sometimes
set) by managing applications.
8.1.1.

SNMP configuration

Allows user to enable and disable SNMP protocol globally, By default SNMP state will
be disabled, User can change the system name with respect to their requirement also can
add system location and contact location.
8.1.1.1.
Node Command
enable show snmp
configure snmp (disable|enable)
configure snmp system-name
STRING
configure snmp system-location
STRING
configure snmp system-contact
STRING
Example:
L2SWITCH#configure terminal

L2SWITCH(config)#snmp enable

L2SWITCH(config)#snmp system-contact IT engineer

L2SWITCH(config)#snmp system-location Branch-Office

This field displays the current threshold.

CLI Configuration

This command displays the SNMP configurations.
This command disables/enables the SNMP on the
switch.
This command configures a name for the system.
(The System Name is same as the host name)
This command configures the location
information for the system.
This command configures contact information for
the system.
114
Description