Tripp Lite NGI-S04C2 Owner's Manual page 128

configure time date
YEAR/MONTH/DAY
configure time daylight-saving-time
configure no time
daylight-saving-time
configure time daylight-saving-time
start-date (first | second |
third | fourth | last) (Sunday
| Monday | Tuesday |
Wednesday | Thursday |
Friday | Saturday) MONTH
HOUR
configure time daylight-saving-time
end-date (first | second |
third | fourth | last) (Sunday
| Monday | Tuesday |
Wednesday | Thursday |
Friday | Saturday) MONTH
HOUR
configure time ntp-server
(disable|enable)
configure time ntp-server
IP_ADDRESS
configure time timezone STRING
min: 0-59
sec: 0-59
Note: If you configure Daylight Saving
Time
after you configure the time, the Switch
will apply Daylight Saving Time.
Sets the current date on the Switch.
year: 1970-
month: 1-12
day: 1-31
This command enables the daylight saving
time.
This command disables daylight saving on
the Switch.
This command sets the start time of the
Daylight Saving Time.
This command sets the end time of the
Daylight Saving Time.
This command disables / enables the NTP
server state.
This command sets the IP address of your
time server.
Configures the time difference between
UTC (formerly known as GMT) and your
time zone.
Valid value: -1200 ~ +1200.
128