Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

6.1.2.

Web Configuration

Parameter Description
Select Enable to permit 802.1 x authentications on the Switch.
State Note: You must first enable 802.1 x authentications on the
Switch before configuring it on each port.
Select whether to use Local or RADIUS as the authentication
method.
The Local method of authentication uses the "guest" and "user"
user groups of the user account database on the Switch itself to
authenticate.
Authentication However, only a certain number of accounts can exist at one
Method time.
RADIUS is a security protocol used to authenticate users by
means of an external server instead of an internal device user
database that is limited to the memory capacity of the device. In
essence, RADIUS allows you to validate an unlimited number of
users from a central location.
Guest VLAN Configure the guest vlan.
When RADIUS is selected as the 802.1x authentication method,
Primary Radius
the Primary Radius Server will be used for all authentication
Server
attempts.
IP Address Enter the IP address of an external RADIUS server in dotted
83