Tripp Lite NGI-S04C2 Owner's Manual page 103

interface acceptable frame type
(all|tagged|untagged)
interface pvid VLANID
interface no pvid
config interface range
gigabitethernet1/0/
PORTLISTS
if-range pvid VLANID
if-range no pvid
configure vlan range STRINGS
configure no vlan range
STRINGS
vlan-range 1-4
vlan-range add PORTLISTS
vlan-range fixed PORTLISTS
vlan-range no fixed PORTLISTS
vlan-range tagged PORTLISTS
vlan-range no tagged PORTLISTS This command removes all tagged member
vlan-range untagged PORTLISTS
vlan-range no untagged
PORTLISTS
Example:
L2SWITCH#configure terminal

L2SWITCH(config)#vlan 2

L2SWITCH(config-vlan)#fixed 1-5

L2SWITCH(config-vlan)#untagged 1-3

L2SWITCH(config)#vlan range 10-14

This command configures the acceptable frame
type.
all - acceptable all frame types.
tagged - acceptable tagged frame only.
untagged – acceptable untagged frame only.
This command configures a VLAN ID for the
port default VLAN ID.
This command configures 1 for the port default
VLAN ID.
This command enters the interface configure
node.
This command configures a VLAN ID for the
port default VLAN ID.
This command configures 1 for the port default
VLAN ID.
This command configures a range of VLAN's
and Maximum allowed VLAN's are 5.
This command removes a range of VLAN's
and Maximum removable VLAN's are 5.
This command will allow user to create VLAN
range maximum allowed VLAN's are 5
This command adds a port or a range of ports
to the vlans.
This command assigns ports for permanent
member of the VLAN group.
This command removes all fixed member from
the vlans.
This command assigns ports for tagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlans.
from the vlans.
This command assigns ports for untagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
vlans.
This command removes all untagged member
from the vlans.
103