6.6.1.2.
Parameter
Description
Select a port number to configure its port isolation settings.
Port
Select All Ports to configure the port isolation settings for all
ports on the Switch.
An egress port is an outgoing port, that is, a port through which
a data packet leaves.
Egress Port
Selecting a port as an outgoing port means it will communicate
with the port currently being configured.
Click Select All to mark all ports as egress ports and permit
traffic.
Select All/
Click Deselect All to unmark all ports and isolate them.
Deselect All
Deselecting all ports means the port being configured cannot
communicate with any other port.
Apply
Click Apply to configure the settings.
Refresh
Click this to reset the fields to the last setting.
Port
"V" indicates the port's packets can be sent to that port.
Isolation
"-" indicates the port's packets cannot be sent to that port.
Status
Web Configuration
99