Tripp Lite NGI-S04C2 Owner's Manual page 89

acl no l4-source-port
IPADDR
acl L4-destination-port
PORT
acl no l4-destination-port
acl vlan VLANID
acl no vlan
acl source interface
PORT_ID
acl no source interface
PORT_ID
Where the MAC mask allows users to filter a range of MAC in the packets' source MAC
or destination MAC.
For Example:
source mac 00:01:02:03:04:05 ff:ff:ff:ff:00
The command will filter source MAC range from 00:01:02:03:00:00 to 00:01:02:03:ff:ff
Where the IPMASK mask allows users to filter a range of IP in the packets' source IP or
destination IP.
For Example:
source ip 172.20.1.1 255.255.0.0
The command will filter source IP range from 172.20.0.0 to 172.20.255.255
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#access-list 111
L2SWITCH(config-acl)#vlan 2
L2SWITCH(config-acl)#source interface 1
L2SWITCH(config-acl)#show
Profile Name: 111
Activate: disabled
VLAN: 2
Source Interface: 1
Destination MAC Address: any
Source MAC Address: any
Ethernet Type: any
Source IP Address: any
Destination IP Address: any
Source Application: any
Destination Application: any
Note: Any: Don't care.
This command removes the UDP/TCP source port
from the profile.
This command configures the UDP/TCP
destination port for the profile.
This command removes the UDP/TCP destination
port from the profile.
This command configures the VLAN for the
profile.
This command removes the limitation of the
VLAN from the profile.
This command configures the source interface for
the profile.
This command removes the source interface from
the profile.
89