Snmp 3; Group; Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

No.
IP Address
Version
Community String
Action
8.2. SNMPv3
SNMP version 3 (SNMPv3) supports authentication and encryption. SNMPv3 uses the
user-based security model (USM) for message security and the view-based access control
model (VACM) for access control. USM specifies authentication and encryption.
8.2.1. SNMPv3 Group

8.2.1.1. CLI Configuration

Node Command
enable show snmp group
enable configure terminal
snmp group GROUPNAME
configure noauth (read STRINGS write
STRINGS notify STRINGS)
snmp group GROUPNAME
configure auth (read STRINGS write
STRINGS notify STRINGS)
snmp group GROUPNAME
configure priv (read STRINGS write
STRINGS notify STRINGS)
no snmp group
configure
GROUPNAME
This field displays the index number of the trap receiver entry.
Click the number to modify the entry.
This field displays the IP address of the remote trap station.
This field displays the version of Simple Network Management
Protocol in use. v1or v2c.
This field displays the community string used with this remote
trap station.
Click Delete to remove a configured trap receiver station.
This command displays all snmp v3

group.

This command changes the node to
configure node.
Configurs v3 group of
non-authentication.
Configurs v3 group of authentication.
Configurs v3 group of authentication and
encryption.
This command removes a v3 group from
switch.
121
Description