Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

5.2.3.2.
Parameter Description
ONVIF Settings
Select option to enable / disable the ONVIF feature on the
State
Switch.
Configures the sending ONVIF discovery packet interval.
Tx Interval
Valid range is 6 ~ 3600 seconds.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
ONVIF Neighbor Information
Port
IP Address
MAC Address
VLAN ID
Product Name
Product Type
Model
Location
Web Service Address

Web Configuration

The connected port of the ONVIF device.
The IP address of the ONVIF device.
The MAC address on the ONVIF device.
The VLAN ID of the ONVIF device join.
Name of the product added.
What kind of product that is added.
Model of the product.
Location where it is placed.
Address of the web service of that camera.
68