Tripp Lite NGI-S04C2 Owner's Manual page 86

Max-req Time
Reauth period
Quiet period
Supp timeout
Server timeout
Reset to Default
Apply
Refresh
Port Status
Port
802.1x State
Admin Control
Direction
Re-authentication
Port Control Mode
Guest VLAN
Max-req Time
Specify the amount of times the Switch will try to connect to
the authentication server before determining the server is
down. The acceptable range for this field is 1 to 10 times.
Specify how often a client has to re-enter his or her username
and password to stay connected to the port. The acceptable
range for this field is 0 to 65535 seconds.
Specify a period of the time the client has to wait before the
next re-authentication attempt. This will prevent the Switch
from becoming overloaded with continuous re-authentication
attempts from the client. The acceptable range for this field is
0 to 65535 seconds.
Specify how long the Switch will wait before communicating
with the server. The acceptable range for this field is 0 to
65535 seconds.
Specify how long the Switch to time out the Authentication
Server. The acceptable range for this field is 0 to 65535
seconds.
Select this and click Apply to reset the custom 802.1x port
authentication settings back to default.
Click Apply to add/modify the settings.
Click Refresh to begin configuring this screen afresh.
This field displays the port number.
This field displays if 802.1 x authentications is Enabled or
Disabled on the port.
This field displays the Admin Control Direction.
Both will drop incoming and outgoing packets on the port
when a user has not passed 802.1x port authentication.
In will drop only incoming packets on the port when a user
has not passed 802.1x port authentication.
This field displays if the subscriber must periodically re-enter
his or her username and password to stay connected to the
port.
This field displays the port control mode.
Auto requires authentication on the port.
Force Authorized forces the port to be authorized.
Force Unauthorized forces the port to be unauthorized. No
packets can Pass through the port.
This field displays the Guest VLAN setting for hosts that
have not passed authentication.
This field displays the amount of times the Switch will try to
connect to the authentication server before determining the
server is down.
86