Tripp Lite NGI-S04C2 Owner's Manual page 88

4 10/100/1000base-t ports+2 100fx/gigabit sfp slots lite managed industrial ethernet switch
Table of Contents

Advertisement

acl
action 802.1p
remarking <0-7>
acl
802.1p VALUE
acl
dscp VALUE
acl
destination mac host
MACADDR
acl
destination mac
MACADDR
MACADDR
acl
destination mac
MACADDR
MACADDR
acl
no destination mac
acl
ethertype STRING
acl
no ethertype
acl
source mac host
MACADDR
acl
source mac
MACADDR
MACADDR
acl
no source mac
acl
source ip host
IPADDR
acl
source ip IPADDR
IPMASK
acl
no source ip
acl
destination ip host
IPADDR
acl
destination ip
IPADDR IPMASK
acl
no destination ip
acl
l4-source-port
IPADDR
DSCP value which will be override to all packets
matched this profile.
This command actives this profile and specify that
it is for 802.1p remark. And configures the new
802.1p value which will be override to all packets
matched this profile.
This command configures the 802.1p value for the
profile.
This command configures the DSCP value for the
profile.
This command configures the destination MAC
and mask for the profile.
This command configures the destination MAC
and mask for the profile.
This command configures the destination MAC
and mask for the profile. The second MACADDR
parameter is the mask for the profile.
This command removes the destination MAC
from the profile.
This command configures the ether type for the
profile. Where the STRING is a hex-decimal
value. e.g.: 08AA.
This command removes the limitation of the ether
type from the profile.
This command configures the source MAC and
mask for the profile.
This command configures the source AMC and
mask for the profile.
This command removes the source MAC and
mask from the profile.
This command configures the source IP address
for the profile.
This command configures the source IP address
and mask for the profile.
This command removes the source IP address
from the profile.
This command configures a specific destination IP
address for the profile.
This command configures the destination IP
address and mask for the profile.
This command removes the destination IP address
from the profile.
This command configures UDP/TCP source port
for the profile.
88

Advertisement

Table of Contents
loading

Table of Contents