Cli Configuration; Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Note: If you configure a port of the Switch from disabled to enabled, all of the MAC
learned by this port will be clear.
Default Settings
The port security on the Switch is disabled.
The Maximum MAC per port is 5.
The port state of the port security is disabled.
6.3.1.

CLI Configuration

Node Command
enable show port-security
configure port-security
(disable|enable)
interface port-security
(disable|enable)
interface port-security limit
VALUE
configure interface range
gigabitethernet1/0/
PORTLISTS
if-range port-security
(disable|enable)
if-range port-security limit
VALUE
6.3.2.

Web Configuration

Description
This command displays the current port security
configurations.
This command enables / disables the global port
security function.
This command enables / disables the port security
function on the specific port.
This command configures the maximum MAC
entries on the specific port.
This command enters the interface configure node.
This command enables / disables the port security
function for the specified ports
This command configures the maximum MAC
entries for the specified ports.
92