Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

7.2.2.

Web Configuration

Parameter Description
Port Mirror Settings
Select option to enable / disable the port mirroring feature on
State
the Switch globally.
Monitor to Port Select the port which connects to a network traffic analyzer.
Settings in this field apply to all ports.
Use this field only if you want to make some settings the same
All Ports for all ports.
Use this field first to set the common settings and then make
adjustments on a port-by-port basis.
Source Port Selects a port to monitor packets received and transmit or both.
Select a port to monitor as destination for the source port.
Select Ingress, Egress or Both to only copy the ingress
(incoming), egress (outgoing) or both (incoming and outgoing)
Monitor Mode
traffic from the specified source ports to the monitor port.
Select Disable to not copy any traffic from the specified source
ports to the monitor port.
Click Apply to take effect the settings.
Apply
Click Refresh to begin configuring this screen afresh.
Refresh
107