Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

L2SWITCH(config)#storm-control rate 1 type broadcast ports 1-6
L2SWITCH(config)#storm-control rate 1 type multicast ports 1-6
L2SWITCH(config)#storm-control rate 1 type DLF ports 1-6
6.5.2.2.
Parameter Description
Storm Control Settings
Select individual port number or range for which you want to configure
Port
storm control settings.
Configure the packet rate in pps to allow on interfaces. Disable for 0 and
Rate
ranges 1 ~ 5000. .
Type
Click the check box to select Multicast / Broadcast / DLF storm control.
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Storm Control Status
Port
This field displays a port number.
Multicast
This field displays the multicast storm control state along with
Rate(pps)
configured rate of pps on the port.
Broadcast
This field displays the broadcast storm control state along with
Rate(pps)
configured rate of pps on the port.

Web Configuration

97