View; Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

Refresh
User Status
User Name
Group Name
Auth Protocol
Priv Protocol
Rowstatus
Action
8.2.3. SNMPv3 View

8.2.3.1. CLI Configuration

Node Command
enable show snmp view
enable configure terminal
snmp view VIEWNAME
configure
STRINGS (included|excluded)
no snmp view VIEWNAME
configure
STRINGS
Click Refresh to begin configuring this screen afresh.
This field displays the v3 user name.
This field displays the group name which the v3 user mapping.
These fields display the security level to this v3 user.
This field displays the v3 user row status.
Click Delete to remove a v3 user.
This command displays all snmp v3

view.

This command changes the node to
configure node.
This command configures the v3 view
name for creating an entry in the
SNMPv3 MIB view table and OID
defining the root of the sub-tree to add to
(or exclude from) the named view and
included or excluded to define sub-tree
adding to the view or not.
This command removes a v3 view from
the Switch.
125
Description