Tripp Lite NGI-S04C2 Owner's Manual page 84

decimal notation.
UDP Port The default port of a RADIUS server for authentication is 1812.
Specify a password (up to 32 alphanumeric characters) as the key
to be shared between the external RADIUS server and the
Share Key
Switch. This key is not sent over the network. This key must be
the same on the external RADIUS server and the Switch.
This is the backup server used only when the Primary Radius
Second Radius
Server Server is down.
Global Status
This field displays if 802.1x authentication is Enabled or
State
Disabled.
Authentication This field displays if the authentication method is Local or
RADIUS.
Method
Guest VLAN The field displays the guest vlan.
This field displays the IP address, UDP port and shared key for
Primary Radius
the Primary Radius Server. This will be blank if nothing has
Server
been set.
Secondary Radius This is the backup server used only when the Primary Radius
Server Server is down.
Apply Click Apply to add/modify the settings.
Refresh Click Refresh to begin configuring this screen afresh.
84