Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

6.1.3.

Web Configuration

Parameter
Port
802.1x State
Admin Control
Direction
Re-authentication
Port Control Mode
Guest VLAN
Description
Select a port number to configure.
Select Enable to permit 802.1 x authentications on the port.
You must first enable 802.1 x authentications on the Switch
before configuring it on each port.
Select Both to drop incoming and outgoing packets on the
port when a user has not passed 802.1x port authentication.
Select In to drop only incoming packets on the port when a
user has not passed 802.1x port authentication.
Specify if a subscriber has to periodically re-enter his or her
user name and password to stay connected to the port.
Select Auto to require authentication on the port.
Select Force Authorized to always force this port to be
authorized.
Select Force Unauthorized to always force this port to be
unauthorized. No packets can pass through this port.
Select Disable to disable Guest VLAN on the port.
Select Enable to enable Guest VLAN on the port.
85