System Settings; Ystem Ettings; Cli Configuration; Modbus Tcp Settings - Tripp Lite NGI-S04C2 Owner's Manual

4.4. System Settings

4.4.1. System Settings
Host Name
The hostname is same as the SNMP system name. Its length is up to 64 characters.
Management VLAN
The Management VLAN is used to configure the switch management VLAN.
4.4.1.1.
Node Command
configure hostname STRINGS
eth0 management vlan
VLANID
4.4.1.2.
MODBUS TCP supports different types of data format for reading. The primary four
types of them are:
Data Access Type
Bit access Physical Discrete
Inputs
Internal Bits or
Physical
Coils
Word access Physical Input
(16-bit Registers
access)
Physical Output
Registers
4.4.1.3.
Node Command
enable show modbus
configure modbus
(disable|enable)

CLI Configuration

This command sets the system's network
name.
This command configures the management
vlan.

Modbus TCP Settings

Function
Code
2
1
4
3
CLI Configuration
This command displays the current Modbus
configurations.
This command disables / enables the Modbus on
the switch.
52
Description
Function Name
Read Discrete Inputs
Read Coils
Read Input Registers
Read Holding
Registers
Description
Note
Not support now
Not support now
Not support now