Cli Configuration - Tripp Lite NGI-S04C2 Owner's Manual

4.4.2.1.
Node Command
enable show igmp-snooping
enable show igmp-snooping
counters
enable show igmp-snooping
querier
enable show multicast
configure clear igmp-snooping
counters
configure igmp-snooping (disable
| enable)
configure igmp-snooping vlan
VLANID
configure no igmp-snooping vlan
VLANID
configure igmp-snooping
unknown-multicast
(drop|flooding)
interface igmp-querier-mode
(auto|fixed|edge)
interface igmp-immediate-leave
interface no
igmp-immediate-leave
interface igmp-snooping
group-limit VALUE
interface no igmp-snooping
group-limit
configure interface range
gigabitethernet1/0/
PORTLISTS
if-range igmp-immediate-leave

CLI Configuration

This command displays the current IGMP
snooping configurations.
This command displays the current IGMP
snooping counters.
This command displays the current IGMP
Queriers.
This command displays the multicast group in
IP format.
This command clears all of the IGMP
snooping counters.
This command disables / enables the IGMP
snooping on the switch.
This command enables the IGMP snooping
function on a VLAN or range of VLANs.
This command disables the IGMP snooping
function on a VLAN or range of VLANs.
This command configures the process for
unknown multicast packets when the IGMP
snooping function is enabled.
drop: Drop all of the unknown multicast
packets.
This command specifies whether or not and
under what conditions the port(s) is (are)
IGMP query port(s). The Switch forwards
IGMP join or leave packets to an IGMP query
port, treating the port as being connected to an
IGMP multicast router (or server). You must
enable IGMP snooping as well. (Default: auto)
This command enables the IGMP Snooping
immediate leave function for the specific
interface.
This command disables the IGMP Snooping
immediate leave function for the specific
interface.
This command configures the maximum
groups for the specific interface.
This command removes the limitation of the
maximum groups for the specific interface.
This command enters the interface configure
node.
This command enables the IGMP Snooping
immediate leave function for the specific ports.
54
Description