Diagnosis; Cli Command; Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

7. Diagnosis

7.1. Alarm Information
The feature displays if there are any abnormal situation need process immediately.
Notice:
The Alarm DIP Switch allow users to configure if send alarm message when the
corresponding event occurs.
For Example:
PWR: ON, The Switch will send alarm message when the main power supply disconnect.
RPS: ON, The Switch will send alarm message when the redundant power supply
disconnect.
7.1.1.

CLI Command

Node Command
enable show alarm-info
7.1.2.

Web Configuration

Parameter
Alarm Information
Alarm Status
Alarm Reason(s)
Function DIP Switch Settings
PWR
This command displays alarm information.
Description
This field indicates if there is any alarm events.
This field displays all of the detail alarm events.
The field display the current Power Control DIP settings.
Disable – Power Control controlled by user configurations.
Enable – Power control is enabled.
105
Description