Web Configuration - Tripp Lite NGI-S04C2 Owner's Manual

if-range lldp-agent
(disable|enable|rx-on
ly|tx-only)
5.2.1.2.
Parameter
LLDP Settings
State
Apply
LLDP Neighbor Information
Local Port
Remote Port ID
This command configures the LLDP agent
function.
disable – Disable the LLDP on the specific port.
enable – Transmit and Receive the LLDP packet
on the specific port.
tx-only – Transmit the LLDP packet on the
specific port only.
rx-only – Receive the LLDP packet on the specific
port.

Web configuration

Description
Globally enables / disables the LLDP on the Switch.
Click Apply to take effect the settings.
The local port ID.
The connected port ID.
64