Ip Configuration; Loop Detection Configuration - Tripp Lite NGI-S08C2POE8 Owner's Manual

5.3.2.1. IP Configuration

Parameter
IPv4 Settings
DHCP Client
IP Address
Subnet Mask
Default Gateway
Apply
Refresh

5.3.2.2. Loop Detection Configuration

Description
Configures the DHCP client function for your Switch.
Enable means the Switch get an IP address from a DHCP server.
Configures a static IPv4 address for your Switch in dotted
decimal notation. For example, 192.168.0.254.
Configures a IP subnet mask of your Switch in dotted decimal
notation for example 255.255.255.0.
Configures an IP address of the default outgoing gateway in
dotted decimal notation, for example 192.168.1.1.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
86