System Configuration - Renesas QB-MINI2 User Manual

4.2.2

System configuration

Figure 4-24 illustrates the system configuration for on-chip debugging.
<8> <8>
Target system Target system
<1> Host machine
Products with USB ports
<2> Software
Includes the debugger, USB driver, device files, and so on.
Download these NEC Electronics software from the following website (ODS).
URL: http://www.necel.com/micro/ods/eng/
<3> USB cable (accessory)
<4> MINICUBE2 (this product)
<5> 78K0-OCD board (accessory)
<6> 10-pin target cable (accessory)
<7> 16-pin target cable (accessory)
<8> Target connector (sold separately)
Note On-chip debugging using TOOLCx and TOOLDx can be performed without using the 78K0-OCD board.
<R>
76
CHAPTER 4 HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
Figure 4-24. System Configuration for On-Chip Debugging
<6> <6>
or or
<5> <5>
<7> <7>
Note
User's Manual
<3> <3>
<4> <4>
U18371EJ5V0UM
<1> <1>
<2> <2>